Adjustments
-Originally used tape to mount each component. Then, we came back and used hot glue. However, there are a few things to watch out for hot glue.
a. You cannot put the tip of the hot glue gun against the battery. This may cause battery to short out.
b. Sometimes attachng the wires to the hot glue didn't work as well because when drying, the wire would lift up and prevent a secure connection.
-Had to move parts around to keep balance.
Ways in which to improve/Insight
-Don't put glue on the axle of the motor!
-Have to be delicate with attaching wires to the motor leads.
Personal thoughts
-If the project begans to lean or fall over, add weight to the opposite side of the machine.
-Originally used tape to mount each component. Then, we came back and used hot glue. However, there are a few things to watch out for hot glue.
a. You cannot put the tip of the hot glue gun against the battery. This may cause battery to short out.
b. Sometimes attachng the wires to the hot glue didn't work as well because when drying, the wire would lift up and prevent a secure connection.
-Had to move parts around to keep balance.
Ways in which to improve/Insight
-Don't put glue on the axle of the motor!
-Have to be delicate with attaching wires to the motor leads.
Personal thoughts
-If the project begans to lean or fall over, add weight to the opposite side of the machine.
You actually got the cup to work. Way to go!
ReplyDeleteGreg
Check out http://49ersastrophysicist.blogspot.com/2009/11/scribbling-machines-example.html for more details.
ReplyDeleteGreg